califere.blogg.se - Immo tool 1.5

#Immo tool 1.5 code

INSTRUMENT CLUSTER for ESPACE III (1998-2002) - Reset odometer, Erase RF remote programming by instrument cluster connector.VALEO IMMOBILIZER for LAGUNA I Ph1 / SAFRANE Ph1 (1995-1996) - Read PINCODE, Reset to VIRGIN.VALEO IMMOBILIZER for LAGUNA I Ph2 (1998-2000) - Read transponder data, Configure, Reset to VIRGIN.VALEO BII for ESPACE III - Read/Write (9)08AZ60 EEPROM, Read/Write mileage, Clear for Replacement, Read transponder data, Emergency Startup.

#Immo tool 1.5 code

IAW 6R.30 - Read TMS370 EEPROM, Clear Immo Code ( car runs without immobilizer code ).

SAFIR / SAFIR2 / SFR200 (35 / 55 pin connector) - Read TMS374 EEPROM, Clear Immo Code ( car runs without immobilizer code ).

SIM32 - Read/Write EEPROM, Read/Write FLASH from HD64F7055, Clear Immo Code.

SID301 - Read/Write EEPROM, Read/Write FLASH, Clear Immo Code, Clear IMPACT DETECTED, Read stored mileage.

EMS3134 (both CAN-BUS and WIRE immo systems) - Read/Write EEPROM, Read/Write FLASH, Clear Immo Code.

EMS3132 (both CAN-BUS and WIRE immo systems) - Read/Write EEPROM, Read/Write FLASH, Clear Immo Code.

SIRIUS 35 - Read/Write EEPROM, Read/Write FLASH, Clear Immo Code.

SIRIUS 34 (both CAN-BUS and WIRE immo systems) - Read/Write EEPROM, Read/Write FLASH, Clear Immo Code.

SIRIUS 32 (both CAN-BUS and WIRE immo systems) - Read/Write EEPROM, Read/Write FLASH, Clear Immo Code.SIRIUS 31H - Read/Write EEPROM, Read/Write FLASH, Clear Immo Code.EDC15C13 - Read/Write EEPROM, Read/Write FLASH, Clear Immo Code.EDC15C3 (both CAN-BUS and WIRE immo systems) - Read/Write EEPROM, Read/Write FLASH, Clear Immo Code.EDC17 / SID305-310 / DCM3.4 / EMS31XX MILEAGE REPAIR by OBD II.Automatic parking brake (TRW) for X95/X38 - R/W Config, Change VIN, set maintenance mode for breakpad replace ( NEW ! ).ABS/ESP (ATE) for X91/X95/X38/L70 - EEPROM R/W, Change VIN, Change KM by OBDII.ECU is ready to accept new immobilizer code after previously programmed code is cleared - no future programming is required. Clear Immobilizer Code function is fully automated - just press button and control unit will be cleared. All functions works by OBDII connector, but any supported control unit can be connected "on the bench" using Connection Manual. There is no need to open control unit, de-solder memory IC or connect any wires directly to it. OBDII tool with various Renault car electronic control unit internal memory modification functions, such as Read/Write EEPROM or FLASH, Clear Immobilizer Code, Read Immobilizer Status and Program Cards.